Accessories And Replacement Parts; What If There Are Problems - Beurer LR 220 Mode D'emploi

9. Accessories and replacement parts

To purchase accessories and replacement parts, please visit www.beurer.com or contact the correspond-
ing service address (according to the service address list) in your country. Accessories and replacement
parts are also available from retailers.
Designation
Filters (pre-filter/HEPA filter class H 13/activated carbon)

10. What if there are problems?

Problem
The air purifier will not switch
on.
Insufficient passage of air
Air purifier is very loud
Possible cause
The housing base is not
inserted correctly.
The three-layered filter is not
inserted at all or is not inserted
correctly.
The mains part plug is not
plugged in.
The filter is dirty.
The air intake/air outlet is
blocked.
There is a foreign body in the air
intake/air outlet.
The filter is blocked.
The filter is not correctly
inserted.
The air purifier is positioned on
an uneven surface.
23
Item number and/or order number
680.07
Solution
Make sure that the bottom
of the housing is correctly
inserted.
Ensure that the three-layered
filter is correctly inserted.
Plug the mains part plug into a
suitable socket.
Clean the filter (see chapter
"Cleaning and maintenance").
Ensure that the air intake/air
outlet is not blocked.
Remove the foreign body from
the air intake/air outlet.
Clean the filter (see chapter
"Cleaning and maintenance").
Insert the filter correctly.
Position the air purifier on a
level surface.