Cleaning And Maintenance; Cleaning The Filter; Cleaning The Housing; Storage - Beurer LR 220 Mode D'emploi

5. Replace the housing base and tighten the large
twist lock on the underside.
Make sure that the housing base is correctly connected to the housing by means of the recesses
before tightening the twist lock.
If you wish to change the filter at specific personal intervals (e.g. every 6 months), there is a sticker
on the upper edge of the filter on which a date can be entered.

8. Cleaning and maintenance

WARNING
Before cleaning, always ensure that the mains plug of the air purifier has been properly disconnected.

8.1 Cleaning the filter

Regular cleaning of the filter (once a month) is a prerequisite for hygienic and fault-free operation. Clean the
outside of the filter with the brush attachment of a vacuum cleaner or a dry cloth.
IMPORTANT
The three-layered filter should be changed after 4260 operating hours (see "Changing the filter" section).
The three-layered filter cannot be washed.

8.2 Cleaning the housing

Clean the housing of the air purifier with a damp cloth (water or a mild cleaning solution). Do not use solvents,
other aggressive cleaning/scrubbing agents or alcohol as the surface could be damaged.

8.3 Storage

If you do not plan to use the device for a long period of time, we recommend that you clean it and store it in
the original packaging in a dry environment, ensuring it is not weighed down by additional items.
Z
Z
Z
6. Press and hold the ON/OFF button on the acti-
vated air filter for 20 seconds until the red FILTER
indicator goes out.
XXX.XX_LR220_2020-02-20_01_printing_BEU
22
2H 4H
ON/OFF FILTER
8H