Replacing The Lamp - Electrolux SC390ICN Notice D'utilisation

Problem
The Wi-Fi does not con‐
nect with the appliance,
the Wi-Fi indicator blinks.
If the advice does not lead to
the desired result, call the
nearest Authorized Service
Centre.
Possible cause
The food products' temper‐
ature is too high.
Many food products are
stored at the same time.
The door has been opened
often.
There is no cold air circula‐
tion in the appliance.
The Wi-Fi router does not
work.
The router needs a restart. Restart the router by un‐
Your connected appliance
needs a Wi-Fi reset.
Your appliance is out of
range from the router.

9.3 Replacing the lamp

The appliance is equipped with a longlife
LED interior light.
ENGLISH
Solution
Let the food products tem‐
perature decrease to room
temperature before stor‐
age.
Store less food products at
the same time.
Open the door only if nec‐
essary.
Make sure that there is
cold air circulation in the
appliance. Refer to the
"Hints and tips" chapter.
Check whether the router
is ON and if other connec‐
ted devices are working. If
the router was OFF, turn it
ON, wait for a few minutes
and check again.
plugging and plugging it.
Wait a few minutes and
check again.
Reset the Wi-Fi connection
by pressing and holding for
10 seconds Control Pan‐
el's Extra Cool and Mode
buttons. Wait a few mi‐
nutes and connect again.
Refer to the "Wi-Fi connec‐
tivity setup" chapter.
Make sure your appliance
is within 10 metres range
from your router and with
not too many walls in be‐
tween.
Connect your appliance to
the 2,4 GHz band on your
WiFi router when onboard‐
ing instead of the 5 GHz
band. This will give a stron‐
ger and longer range sig‐
nal.
87