Samsung DVD-VR375 Manuel D'utilisation page 80

reference
TROUBLESHOOTING (DVD-VIDEO/DVD-RAM/DVD±RW/DVD±R)
If your product malfunctions, go through the check points below before contacting a Samsung customer service.
PROBLEM
No power.
The input is displayed for a while when the
power turns on.
Cannot record TV programs.
Timer recording does not work properly.
Cannot record.
I pressed the REC button but there is no
response.
I forgot the parental control password.
Cannot play the disc.
No sound.
80_ reference
EXPLANATION/SOLUTION
• Check whether the power cord is securely plugged into the power outlet.
• Did you press the power button of your DVD Recorder & VCR.
• The DVD Recorder & VCR requires some time to initialize after it is turned on.
• Check whether the power cord is securely plugged into the power outlet.
• Did you set the DVD Recorder & VCR channel settings correctly?
• Check the free space on your DVD-RAM/DVD±RW/DVD±R disc.
• Check if the antenna cable is connected properly.
• Check the recording time, end time and current time settings again.
• Recording will be cancelled if the power is interrupted due to a power failure or other
reason during recording.
• Check whether the disc is formatted. This product can record on formatted discs
only. (See pages 58,77.)
• Check whether your DVD-RAM/DVD±RW/DVD±R disc has a suffi cient free space.
• Recording is available on DVD-RAM/DVD±RW/DVD±R discs only.
• If a program is copy protected, you cannot record it.
• Press and hold the CH./CH,( I❮❮ / ❯❯I ) button on the front panel of your unit
for more than 10 seconds with no disc, and then press the POWER OFF/ON button.
All settings including the password will revert to factory settings. Only do this if it is
absolutely necessary. (Note that this function is available only when there is no disc
inserted.)
• Check whether the disc is inserted correctly with the label facing up.
• Check the regional code of your DVD disc.
• This DVD Recorder & VCR cannot playback some types of disc. (See pages 7, 47.)
• Are you watching a program in slow or skip mode?
If you are playing a program at a speed other than normal speed, sound is not
output. (Except for forward search Playback (Fast1))
• Check the connections and initial settings.
• Check whether the disc is damaged.
• Clean the disc, if necessary.
• Check whether the disc is inserted correctly with the label facing up.