Discs That Cannot Be Played; Playing A Disc - Samsung DVD-VR375 Manuel D'utilisation

Discs That Cannot be Played

•
DVD-Video with a region number other than "1" or "ALL"
•
3.9 GB DVD-R Disc for Authoring.
•
A DVD-RW(V)/-R(V)/+R disc which has been recorded and not fi nalized in a different manufacturer's recorder.
•
PAL discs
•
DVD-ROM/PD/MV-Disc, etc.
•
Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I
M

This DVD Recorder & VCR can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.

Playback and/or recording may not work for some types of discs or when specifi c operations, such as angle change
and aspect ratio adjustment, are being performed. Information about the disc is written in detail on the box. Please
refer to this if necessary.

Do not allow the disc to become dirty or scratched.
Fingerprints, dirt, dust, scratches and deposits of cigarette smoke on the recording surface may make it impossible
to use the disc for recording.

DVD-RAM/±RW/±R discs may not be able to play on some DVD players, depending on the player, disc and the
condition of the recording.

Discs with PAL programs recorded on them cannot be played using this product.

PLAYING A DISC

1. Press the OPEN/CLOSE button.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press OPEN/CLOSE button to close the disc tray.
•
Your DVD Recorder & VCR closes the disc tray and plays the disc automatically.
•
The recorder does not play discs automatically after initially being powered on.
•
When the recorder is powered on and a disc is in the tray, the unit will be activated and wait in stop
mode. Press the PLAY button to start playback.
•
Power on the unit with the PLAY button if you wish to automatically play a disc in the recorder while it is powered off.
4. Press the STOP button to stop playback.
M

When you stop playing the disc, the DVD Recorder & VCR remembers where you stopped. When you press the PLAY
button again, it will pick up where you left off. (unless the disc is removed, the DVD Recorder & VCR is unplugged, or
if you press the STOP button twice.) This function is only applicable to DVD-VIDEO, DVD-RAM, DVD±RW, DVD±R or
Audio CDs (CD-DA).
J

Do not move your DVD Recorder & VCR while playing, as this may cause damage to the disc.

Make sure to press the OPEN/CLOSE button to open or close the disc tray.

Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction.

Do not place foreign materials on or in the disc tray.

Some functions may perform differently or be disabled depending on the disc type.
If this occurs, refer to the instructions written on the disc case.

Be especially careful that children's fi ngers are not caught between the disc tray and the tray chassis when it closes.

After turning the power on, it will take a few seconds until the DVD Recorder & VCR operates.
English _47