Making A One Touch Recording (Otr); Making A Timer Recording - Samsung DVD-VR375 Manuel D'utilisation

Masquer les pouces Voir aussi pour DVD-VR375:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

recording

MAKING A ONE TOUCH RECORDING (OTR)

One-Touch Recording (OTR) allows you to add recording time in preset increments up to 8 hours by pressing the
REC button repeatedly.
1.
If you want to record through a connected external component, press the INPUT SEL. button to select
an appropriate external input (AV1, AV2, DV or CH).
2.
Press the DVD or VCR button on the remote, or DVD/VCR on the front panel to select the DVD or VCR
mode.
3.
Press the REC button to start recording.
4.
While in Record mode, press the REC button again to activate the One-Touch Recording (OTR).
Record length 0:30 appears on the On-Screen Display and the DVD Recorder & VCR will record for
exactly 30 minutes.
5.
Continue press the REC button to add recording time in preset increments up to 8 hours.
→ 0:30 → 1:00 → 1:30 → 2:00 → 2:30 → 3:00→ 3:30→ 4:00 → 4:30 → 5:00 → 5:30 → 6:00 → 6:30 → 7:00 → 7:30 → 8:00 → Normal
The DVD Recorder & VCR stops recording automatically when the time has elapsed.
To stop recording
Press the STOP () button.
1.
The message "Press STOP button once more to cancel Timer record." is displayed.
2.
Press the STOP () button again.
The message "Updating the Information of disc. Please wait for a moment." is displayed.
M
The timer counter decreases by the minute from the recording time set to 0:00, then the DVD Recorder & VCR stops
recording.

MAKING A TIMER RECORDING

The clock (Setup – Clock Set) must be set before proceeding with a timer recording. (See page 32-34)
1.
Press the OPEN/CLOSE button, and place a recordable disc on
the disc tray(or load a tape into the VCR).
2.
Press the OPEN/CLOSE button to close the disc tray. Wait until
"LOAD" disappears from the front panel display.
3.
With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Timer, then press the ENTER
4.
button.
Press the ▲▼ buttons to select Timer-Standard, then press the
5.
ENTER button.
You can go to the Timer recording screen directly by pressing the TIMER REC button.
The Timer Recording screen is displayed.
Fill in the items using the ▲▼◄ ► buttons.
6.
◄► : Moves to the previous/next item,
▲▼ or 0~9 : To set or change items in the Scheduled Record List Menu.
62_ recording
XCVKL
XCVKL
Timer
Title List
Timer - Standard
Timer List
Timer
Edit
Dubbing
Disc
Setting
Setup
> Move
sEnter
rReturn
12:00 AM
eExit

Publicité

Table des Matières
loading

Table des Matières