Recording Immediately - Samsung DVD-VR375 Manuel D'utilisation

recording

RECORDING IMMEDIATELY

Before you start
1. Make sure the antenna cable is connected.
2. Press the OPEN/CLOSE button and place a recordable disc on the disc tray.
3. Check the remaining time on the disc.
DVD-RAM/DVD±RW/+R discs should be formatted or initialized in advance before beginning recording. Most new discs
are sold unformatted. Make sure to format your unformatted discs before recording.
4. Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
Recording the current program you are watching
1. Press the CH/TRK buttons or number buttons to select the
station you want to record.
2. Press the REC SPEED button repeatedly, to select the recording
Speed (quality).
→ HQ → HSP → SP → LSP → ESP → LP → EP → SLP
3. Press the REC button.
Recording from external equipment you are watching
1. Power on your DVD Recorder & VCR and switch to AV IN mode by pressing the INPUT SEL. button on
the remort control.
→ AV1 → AV2 → DV → CH
2. Press the REC SPEED button repeatedly to select the recording Speed (quality).
→ HQ → HSP → SP → LSP → ESP → LP → EP → SLP
3. When your DVD Recorder & VCR is in the Stop mode, set the operation mode of your external devices to
play mode.
4. Press the REC button on your DVD Recorder & VCR when the image from which you want to start
recording is displayed.
To pause recording
Press the PAUSE (
•
Press the PAUSE (
•
You can switch channels by pressing the CH/TRK buttons while recording pauses.
To stop recording
Press the STOP button to stop a recording in progress.
•
When using DVD-RAM/DVD±RW/±R discs, the message "Updating the information of disc.
Please wait for a moment." is displayed.
60_ recording
) button to pause a recording in progress.
) button again to resume recording.
KLXCV
DVD VR SP
-RW
AV 1