Fein ASCM18QM Mode D'emploi page 16

OBJ_BUCH-0000000371-001.book Page 16 Wednesday, February 20, 2019 9:29 AM
en
16
Mounting the drill chuck (figure 5).
Fig. 5
1.
When changing the drill chuck, avoid debris
from entering the drill chuck and the spindle!
Slide the ring toward the front.
Place the drill chuck onto the spindle.
Release the ring.
Turn the drill chuck to lock it.
Drill chuck
Ring
2.
3.
4.
Removing the drill chuck (figure 6).
Fig. 6
When changing the drill chuck, avoid debris
Ring
from entering the drill chuck and the spindle!
Slide the ring frontwards and pull the drill
chuck off the spindle.
1.
2.
Drill chuck