Assembling The Equipment - koban KVD-01-33 Mode D'emploi

14. Assembling the equipment

For use on overhead lines and bus-bars.
Select a contact electrode to suit the application and screw it onto
the detector.
Standard "Y" Contact Electrode
Standard "HOOK" 40 mm Contact Electrode
Standard "HOOK" 60 mm Contact Electrode
Standard "HOOK" 100 mm Contact Electrode
Assemble the detector to the to the link stick or the insulating
electrode and without an insulating stick. Always ensure
proper contact electrode is attached securely to the head.
For use on capacitive test points
on capacitive test points of separable connectors and on insulated
polymeric cables in fused cable boxes.
-12-
www.grupotemper.com