Safety Rules - koban KVD-01-33 Mode D'emploi

● The detector viewing face or facia must always be Considered
to be at the same voltage as the conductor under test. The safe
working distance must always be from that viewing face.
● Never attempt to touch the viewing face or press the test button
should the lights go out when the contact electrode is touching, or
is in the vicinity of the conductor under test.
● This instrument should only be used by a competent, suitably
trained person which understand fully this test procedure.
Personal working with High Voltage should Be trained
regularly.
● Use Protective gear.
Caution, risk of electric shock.
Caution, refer to the user's manual.
ALWAYS TREAT ALL CONDUCTORS AS LIVE
ALWAYS TREAT ALL CONDUCTORS AS LIVE
ALWAYS TREAT ALL CONDUCTORS AS LIVE

SAFETY RULES

READ MANUAL
UNDERSTAND INSTRUCTIONS
TRAINING
LINK STICK ( SAFETY DISTANCE)
CHECK BEFORE & AFTER
RED MARK
ALWAYS BE SAFE AND PROTECTED
-2-
www.grupotemper.com