Typical Uses - koban KVD-01-33 Mode D'emploi

11.
Checking
Press the TEST/ARMING button to check the function of the
internal circuitry and the condition of the battery.
twice per second and the Buzzer should also sound twice per
second.
for about 3 minutes.
If the High Bright Green leds goes off immediately , replace the
battery (see battery replacement).
If the detector still does not arm correctly, then it is faulty and
should be returned to the manufacturer for repair.
Using a known high voltage AC source.
Arm the detector if necessary.
Present the detector, armed if necessary, to a high voltage source,
touching it with the contact electrode. The High Bright Red Leds

12. Typical uses

The main function of the detector is to determine whether a
conductor is energised or de-energised so that it may be safely
earthed before commencing work.
The Detector is utilized to determine if a conductor is at a potential
(conductor to earth) higher than the threshold level for which the
detector is set.
Once the conductor is at a potential higher than the set threshold,
per second.
-10-
www.grupotemper.com