Clatronic CDP 604 MP3/VCD Mode D'emploi page 72

5....-05-CDP 604 neu
1. VCD Functions
GB
Operation
Press ( II)
Press
STOP ( )
Press
(I (3/13))
Press
( I (4/21))
Hold
(I / (3/16))
Hold
( I / (4/18))
Press MODE
Press NP
Press PBC
(Playback Control)
Press AUDIO/EQ
REPEAT
PROGRAM
SLOW
RESUME
DIGEST
ZOOM
R/L
72
15.06.2004
1. The device is switched on and the disc searched.
2. Pause during playback
3. Playback is resumed.
Playback is stopped.
Skips to the previous track.
With this key you can skip to the next or next-but-one track etc.
Keep this key pressed down to start the fast reverse search.
Keep this key pressed down to start the fast forward search.
Switches between the simple repeat, repeat all and RANDOM function.
Switches between "NTSC" and "PAL" video output systems.
Press once : PBC switched on, display on the screen
Press twice : PBC switched off.
AUDIO function: selects between the settings left-hand channel, right-
hand channel and stereo.
Press once = "REPEAT 1": The current track is repeated continuously.
Press twice = "REPEAT ALL": The current CD is repeated continuously.
Press 3 times = "REPEAT CANCEL" All functions are cancelled. Normal
playback is resumed.
First press ( ), then PROG. The words "PROG" and "TRK" appear in the
display. Select the order with the I
=+1) or with the /
Select the order directly using the number buttons (5). For a two-digit
number, first the +10 key and then the units figure. Programming is alrea-
dy stored. Press ( II).
Select between the speeds 1/2 ,1/4, 1/8, 1/16
Resumes from the same position after stop (see RESUME)
Shows the pictures in a small format (see DIGEST)
Used to enlarge a picture section (see ZOOM)
Switches between the audio channels
14:19 Uhr
VCD Functions
/ I keys (key 3 = +10, key 4
(16/18).
Seite 72