Clatronic CDP 604 MP3/VCD Mode D'emploi page 70

5....-05-CDP 604 neu
TIME (7):
GB
DIGEST (8):
OSD (9):
RETURN (10):
PBC (11):
RESUME (12):
SLOW (14):
ZOOM (17):
REPEAT (20):
R/L (22):
70
15.06.2004
With the TIME key you can enter the time from which playb-
ack is to start. When this key is pressed, the words GOTO --
:-- appear on the screen. Please enter the corresponding
figures. The first set of figures represents the minutes and
the second set the seconds. The figure "0" is entered using
the "10" key.
When this key is pressed, the player subdivides the VCD file
currently being played into nine parts of equal size and dis-
plays pictures on the screen at the same time. This may
take a few minutes, depending on the size of the file. With
the 1-9 number keys you can change to the desired section,
which is then animated. Press the key DIGEST again to
continue from the selected section in full picture mode.
This displays the CD type, the functions - e.g. SINGLE
REMAIN, the number of the track and the remaining playing
time of the CD. Press the key up to five times and select
between the various settings.
Pressing this key stops CD playback. The main menu is dis-
played. This function can only be used if the CD that has
been inserted is a video 2.0 CD and the PBC mode is
activated (ON) (only in VCD mode).
Switches PBC on and off (only in VCD mode).
If the stop key is pressed, CD playback is halted. If the
RESUME key is then pressed, playback resumes from the
position where playback was interrupted (only in VCD
mode).
Switches on the slow motion function during the playback of
video CDs. Each time the SLOW key is pressed, the speed
is changed between 1/2x, 1/4x, 1/8x and 1/16x. To return to
normal playback, press the
In order to enlarge a picture segment, press the key ZOOM
during playback. The respective picture can be displayed
using the ZOOM key in two different sizes. With the I
I / cursor keys it is possible to locate the picture
segment more accurately. To return to normal playback,
press the ZOOM key until the word "RESTORE" appears
(only in VCD mode).
See both tables.
Switches between the loudspeaker settings: MONO L,
MONO R, STEREO (only in VCD mode).
14:19 Uhr Seite 70
II key (only in VCD mode).