Care And Maintenance; Troubleshooting; Technical Specifications - Kärcher AD 3 Mode D'emploi

Storing the appliance
 Illustration
Stow away the mains cable and accessory at the
machine. Store the appliance in a dry room.

Care and maintenance

 Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
 If required, rinse the container and accessories
with water properly and dry them before reuse.
Clean flat fold filter
Illustration
 Remove the appliance head. Remove the frame
and filter and knock the dirt out of the filter. Clean
the filter under running water if necessary. Do not
rub or brush the filter dry.
Let it dry completely prior to installation.
Illustration
 After that, insert the filter first and then the frame.
Insert and lock the appliance head.

Troubleshooting

Decreasing cleaning power
Note:
The amount that can be vacuumed up can vary depend-
ing on the vacuuming material.
If the cleaning power of the appliance deteriorates
please check the following:
 Accessories, suction hose or suction pipes are
clogged, please remove the obstruction using a
stick.
Illustration
 The flat fold filter or the coarse dirt filter is dirty.
Knock on the flat fold filter or filter basket and clean
under running water if necessary.
 In case of visible smoke generation: Pull out the
mains plug and take the appliance outside.
16

Technical specifications

Voltage
1~50-60 Hz
Output P
nom
Protective class
Mains fuse (slow-blow)
Container capacity
Water intake with handle
Water intake with floor nozzle
Power cord
Sound pressure level
(EN 60704-2-1)
Weight (without accessories)
Subject to technical modifications!
– 10
EN
220 - 240 V
1000 W
II
10 A
17 l
3,0 l
3,0 l
H05VV-F
2x0,75
73 dB(A)
6,5 kg