Care And Maintenance; Technical Specifications - Kärcher WD 3 Mode D'emploi

Care and maintenance

DANGER
Turn off the appliance and re-
move the mains plug prior to any
care and maintenance work.
Repair works may only be per-
formed by the authorised cus-
tomer service.
WARNING
Do not use abrasives, glass or
universal cleaners! Never im-
merse the appliance in water.
 Clean the appliance and accessory
parts made of plastic with a commercial
plastic cleaner.
 If required, rinse the container and ac-
cessories with water properly and dry
them before reuse.
Illustration
 Only clean the cartridge filter under run-
ning water; do not wipe or brush. Let it
dry completely prior to installation.
Troubleshooting
Decreasing cleaning power
If the cleaning power of the appliance dete-
riorates please check the following:
 Accessories, suction hose or suction
pipes are clogged, please remove the
obstruction using a stick.
Illustration
 Filter bag is full, install new filter bag.
Illustration
 Cartridge filter is dirty, knock off dirt
from cartridge filter and clean under
running water if necessary.
 Replace damaged cartridge filter.
10

Technical specifications

Voltage
1~50-60 Hz
Output P
nom
Mains fuse (slow-blow)
Container capacity
Water intake with handle 10
Water intake with floor
nozzle
Power cord
Sound pressure level (EN
60704-2-1)
Weight (without accesso-
ries)
Subject to technical modifications!
EN
– 10
220- V
240
1000 W
10 A
17 l
l
8 l
H05VV-F
2x0,75
75 dB(A)
5,5 kg