How To Hang Your Ceiling Fan - Emerson BUILDER CF700BS09 Manuel Du Propriétaire

BP7312-4 CF700.qxp_ BP7312 2/27/15 5:14 PM Page 11
The fan must be hung with at least 7' of clearance from
floor to blades (Figure 12).
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
outlet box listed as "Acceptable for Fan Support of
22.7 kg. (50 lbs.) or less".
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked "Acceptable for
Fan Support of 22.7 kg. (50 lbs.) or less", and use
screws supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are not
acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
4.1
Securely attach the hanger bracket to the outlet box
using the two screws supplied with the outlet box.
(Figure 14).
Hanger bracket must seat firmly against outlet box. If
the outlet box is recessed, remove wall board until
bracket contacts box. If bracket and/or outlet box are
not securely attached, the fan could wobble or fall.

4. How to Hang Your Ceiling Fan

WARNING
!
WARNING
!
WARNING
!
WARNING
!
AT LEAST
7'
Figure 13
TWO SCREWS
SUPPLIED WITH
OUTLET BOX
Figure 14
Please contact 1-800-654-3545 for further assistance
11
CEILING
FLOOR
OUTLET BOX
HANGER BRACKET
ANTI-ROTATION TAB
emersonfans.com
U.L. Model No.: 52-ANT