Emerson BUILDER CF700BS09 Manuel Du Propriétaire page 15

BP7312-4 CF700.qxp_ BP7312 2/27/15 5:14 PM Page 15
5. How to Wire Your Ceiling Fan
5.5
Screw the two threaded studs (supplied) into the
tapped holes in the hanger bracket (Figure 20).
5.6
Lift the ceiling cover up to the threaded studs and turn
until studs protrude through the holes in the ceiling
5.7
cover (Figure 21).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied). (Figure 21).
Tighten the knurled knobs securely until the ceiling
cover fits snugly against the ceiling and the hole in the
ceiling cover is clear of the downrod.
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
WARNING
!
(Continued)
THREADED
STUDS (2)
Figure 20
Figure 21
Please contact 1-800-654-3545 for further assistance
15
CEILING COVER
THREADED STUDS (2)
LOCKWASHERS (2)
KNURLED KNOBS (2)
emersonfans.com
U.L. Model No.: 52-ANT