FOUR CHANNEL REMOTE CONTROL TRANSMITTER
Explanation transmitter
Throttle Stick + Rudder
ON/OFF switch
BATTERY MOUNTING
1.
2.
LIPO BATTERY CHARGING
The quadcopter is fitted with a LiPo battery.
1. The supplied LiPo battery is stored in the body of the
quadcopter.
2. Connect the battery of the quadcopter to the connector of the
USB charger. The indicator light on the USB plug glowing during
the charging process. The light goes out once charging has
finished.
Do not leave the copter or the charger unattended during the
charging process and always disconnect the battery from the
charger after completion! While charging, place the battery and
charger on a fireproof base!
Charging time is about 40 min.
GB // 16
(transmission power max. 10mW)
Antenna
3.
Power
indicator
Direction Stick
Acrobatic-knobs /
Headless function
Caution
• Do not mix old and new batteries/rechargeable batteries.
• Do not mix different types of batteries.
• Do not charge non-rechargeable batteries.
Put fresh AA Mignon batteries with correct polarity into the
battery-case.