Compliance With Standards - Philips QS6160 Mode D'emploi

- If the appliance is subjected to a major change in temperature, pressure
or humidity, let the appliance acclimatise for 30 minutes before you use
it.
- If the adapter or the charging stand is damaged, always have it replaced
with one of the original types in order to avoid a hazard.
- Do not use the appliance if the shaving head or one of the trimming
combs is damaged or broken, as this may cause injury.
- This appliance is only intended for trimming and dry shaving facial hair
(beard, moustache and sideburns).
general
- The appliance complies with the internationally approved IEC safety
regulations and can be safely cleaned under the tap.

compliance with standards

This Philips appliance complies with all standards regarding electromagnetic
ields (EMF). If handled according to the instructions in this user manual, the
appliance is safe to use based on scientiic evidence available today.
charging
QS6160 only: Charging normally takes approx. 1 hour.
QS6140 only: Charging normally takes approx. 4 hours.
When the appliance is fully charged, it has an operating time of 50 minutes.
Battery status indicator:
When the battery status indicator lashes white, the battery is being
-
charged.
- When the battery status indicator lights up white continuously, the
battery is fully charged. This indication is shown for 30 minutes and
then the battery status indicator goes out.
When the battery status indicator lashes orange, the battery is almost
-
empty (approx. 10 minutes of operating time left).
When the battery status indicator lashes orange quickly, the battery
-
is empty and you have to charge the appliance before you can use it
again.
Note: The appliance can only be charged in the charging stand.
1 Insert the small plug into the charging stand.
Note: The small plug is easiest to insert when the charging stand is folded.
2 Unfold the charging stand ('click').
3 Put the adapter in the wall socket.
EngliSh
7