Consignes De Sécurité Using Your Machine - MAGIMIX Glacier Mode D'emploi

Before using your appliance for the first time, wash all the parts (except for the motor unit)�
Make sure you dry them thoroughly, especially the bowl�
Place the bowl upright in the freezer, making sure it is
completely level, for at least 12 hours at -18 °C�
For the Glacier 1�1, place the spindle in the hole,
then attach the lid to the motor unit + paddle�
Make sure the hole
where the safety pin fits
is not blocked� Position
the motor/lid unit on the
bowl�
Make sure you chill your mixture in the fridge to a temperature of around 10°C before pouring it into
the bowl�
If the motor/lid unit assembly is not correctly fixed to the bowl, the motor will not start.
During the freeze-churning process the mixture increases considerably in volume,
depending on the recipe.
For this reason, make sure you only fill the bowl two thirds full at the start.
CONSIGNES DE SÉCURITÉ
Lock the motor/lid unit
onto the bowl�
USING YOUR MACHINE
Shake the bowl to check
that the freezing agent
inside is frozen solid�
For the Glacier 1�5, attach the lid to the motor unit,
then place the paddle in the hole�
Switch your ice cream
maker on�
Unwind the power
cord and connect your
appliance to the mains
supply�
Pour the mixture in
straightaway�
23