Programmes; Options; Acoustic Signals - AEG FAVORIT 35400 VI Mode D'emploi

4. PROGRAMMES

Programme
2)
4)
5)
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
2) This programme has a high temperature rinsing phase for better hygiene results. During
the rinsing phase, the temperature stays at 70 °C for 10 to 14 minutes.
3) With this programme you can wash a load with fresh soil. It gives good washing results
in a short time.
4) This is the standard programme for test institutes. With this programme you have the
most efficient use of water and energy consumption for crockery and cutlery with normal
soil.
5) Use this programme to quickly rinse the dishes. This prevents the remaining food to
bond on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

5.1 Acoustic signals

The acoustic signals operate in these
conditions:
• When the programme is completed.
• A malfunction occurs to the appliance.
1) Degree of
soil
Type of load
Heavy soil
Crockery, cut-
lery, pots and
pans
Fresh soil
3)
Crockery and
cutlery
Normal soil
Crockery and
cutlery
Normal soil
Crockery and
cutlery
All
Programme Duration
phases (min)
Prewash 110 - 120
Wash 70 °C
Rinses
Dry
Wash 60 °C 30
Rinse
Prewash 100 - 110
Wash 65 °C
Rinses
Dry
Prewash 120 - 130
Wash 50 °C
Rinses
Dry
Prewash 11
Factory setting: on.
You can deactivate the acoustic
signals.
Deactivating the acoustic signals
1. Press the on/off button to activate
the appliance.
ENGLISH
23
Energy Water
(kWh) (l)
1.5 - 1.7 18 - 20
0.8 8
1.4 - 1.5 18 - 20
0.8 - 0.9 12 - 13
0.1 5