Inspection; Disposal - zarges Z600 Mode D'emploi

7.2 Inspection

8. Disposal

> The product must be regularly inspected by a technical expert to ensure that it
is safe to operate. The technical expert is authorised to carry out inspection by
the operator and must have taken part in the seminars prescribed by law in the
country concerned.
> The inspection intervals must be appropriate for the specific operating
conditions. Inspection must be carried out at least once a year.
> The inspection must be documented. Check sheets for inspection of the
product are available on the ZARGES homepage. After successful inspection,
attach the ZARGES inspection plate (Order No. 828384 or 828385) to the
product. The month and year in which the next inspection is due must be clearly
visible.
> The product is made mainly of aluminium. Dispose of the product components
as follows:
Aluminium: Recycling
Steel: Recycling
Plastic: Energy recovery (ladder feet, end caps, wheels)
21