Table des Matières

Publicité

Important advice

When using the machine, the following basic precautions should be taken :
– Carefully read the instructions before using the appliance for the first time.
– Before connecting your iron to the mains, make sure that your mains voltage corresponds to
the voltage indicated on the rating plate.
– This machine should only be used for its intended purpose: ironing and pressing.
– When unplugging the machine, pull the plug, not the cable.
– Make sure that the power cable does not touch any hot surfaces.
– Always make sure that the steam hose is completely taken out of its casing while you are
ironing (hot surface).
– Never plug in nor unplug if your hands are wet.
– Do not use the iron if it is damaged, if it leaks, or if the power cable is damaged. To avoid
any risk of electric shocks, do not dismantle your iron. Contact your nearest After Sales
Service dealer for servicing or repair
– Great care must be taken when ironing in the presence of children. Do not leave the iron
unattended whilst switched on.
– Do not leave the iron unattended while it is switched on.
– Keep the iron and its cord out of reach of children less than 8 years of age when it is
energized or cooling down.
– This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
– To avoid a circuit overload, do not operate another high wattage appliance on the same
circuit.
– If an extension lead is absolutely necessary, a 10 amp cable should be used. Ensure no one
can trip over or unplug the extension lead. It must be fitted with an earth connection.
– Use a mains supply which has an earth connection, for your own safety.
– Never immerse the machine in water or other liquids, not even partially.
– Do not touch the hot surfaces.
– The iron must be used and rested on a stable surface.
– The iron must only be used with the stand provided.
– Take care to place the iron on its rest after each ironing operation. Never put the iron down
vertically.
– When placing the iron on its stand, ensure that the surface on which the stand is placed is
stable.
– For any repair, contact an approved registered after-sales service centre, so that the repair
will be in accordance with the standards indicated in this instruction book.
– Any repair done by an unauthorised person would cancel the warranty.
– Once out of order, every appliance must be made unusable before being thrown away. To this
aim, the power cord must be cut.
The manufacturer reserves the right to makes changes and alterations to the product without prior notice.
5

Publicité

Table des Matières
loading

Table des Matières