Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
THE WINCH MOUNTING PLATE INSTALLATION IS NOW COMPLETE.
•
Wire winch according to instructions found in winch kit.
PROCEED TO SECTION TITLED "MAINTENANCE/CARE".
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted
or deformed.
2. Inspect all nuts and bolts on the winch, winch mount, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
PERFORM REGULAR INSPECTIONS ON THE WINCH, WINCH
MOUNT, AND RELATED HARDWARE. NEVER OPERATE THE
WINCH WITH DAMAGED OR MISSING PARTS. FAILURE TO
FOLLOW THIS WARNING MAY CAUSE VEHICLE DAMAGE AND
OPERATOR INJURY OR DEATH.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
M A I N T E N A N C E / C A R E
WARNING
6
88448A1
Publicité
Chapitres
Table des Matières
