Warn 88449 Instructions D'installation page 5

6. Position winch mount assembly to vehicle frame.
7. Loosely install fasteners.
8. Remove top inner sway bar fasteners.
9. Loosely install top fasteners in orientation shown using
fasteners (B3, B4 ,B5) and spacer (B6). See figure 5.
10. Loosely install lower strap fasteners (B7, B5, B2).
11. Tighten all fasteners.
12. Re-install grill insert removed in step 1.
READ THE VEHICLE'S OPERATOR MANUAL, WINCH OPERATOR
MANUAL, AND ALL WARNING LABELS PRIOR TO OPERATION OF
UTV AND WINCH.
FAILURE TO SECURELY TIGHTEN ALL BOLTS ON THE WINCH
PLATE, WINCH, AND FAIRLEAD CAN RESULT IN PRODUCT FAILURE
WHICH MAY RESULT IN VEHICLE DAMAGE AND OPERATOR INJURY
OR DEATH. DOUBLE CHECK THAT ALL BOLTS ARE SECURELY
TIGHTENED PRIOR TO USE.
©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
WARNING
WARNING
5
Figure 4
Figure 5
88448A1