Bemer Classic-Set Mode D'emploi page 25

Creating a program Procedure for creating programs
•
Press the [SET] button. There are 10 blocks available. Each block
•
has a duration of 2 minutes. Set the de-
Then press the [EDITOR] button.
sired intensity by using the up or down
•
Now, choose the desired storage location
arrow keys, and select one of the blocks
for your new program (buttons 4-12).
by using the left or right arrow keys.
Example – creating your own program
48
•
If your program uses the plus Signal,
press the [PLUS] button.
•
Now, save the program with [SAVE].
Saving on your memory card
•
The memory card is not standard equip- Slide the memory card into the card slot.
•
ment. Please refer to your local BEMER
Press the [SET] button.
partner or BEMER support for more infor-
•
Press the [EDITOR] button.
mation.
•
Now select the storage location of the
desired program (using buttons 4-12).
•
Make the necessary changes on the chosen
program (see "Creating a program").
•
Now save the program on the memory
card by pressing the button [SAVE – with
the card symbol].
Example – saving on a memory card
fr es en
Cards with individually designed
programs can be assigned only
by physicians or alternative
practitioners experienced in
using BEMER.
49