Bemer Classic-Set Mode D'emploi page 11

Programs on the control unit
The predefined program settings were specially developed for
the use of local applicators (B.SPOT, B.PAD, B.SIT) so that an
additional impulse can be delivered locally.
Local application is not a sufficient replacement for the
Basic Plan.
Use the local application two or three times per day, beginning
with P1, and change after two or three days to P2. The aim is not
to get to P2; if you feel uncomfortable with P2, dial back to P1.
The more chronic (the less recent) the occurrence,
the lower the program level at which you should
begin application. The more acute (the more re-
cent) the occurrence, the higher you can begin.
penetration depth
program duration into the body
P1
Recommended Low intensity for
for home use 8 min. superficial applications
P2
Medium intensity for
Recommended for moderate to deeper
health care facilities 16 min. applications
P1-P2 for daily users
P3
Strong intensity for the
20 min. deepest penetration
P3 for active athletes
Sleep Program
The Sleep Program supports of the regeneration process during
sleep. This is of major importance, especially for individuals who
are undergoing rehabilitation and those persons who are elderly.
Before going to bed, the sleep program is activated on the con-
trol unit. It will automatically send a predefined signal during the
first 2 and last 2 hours of sleep.
fr es en
Individual BEMER consultation
If you still have questions or are uncertain, please
contact your treating physician. For general BEMER
product support, visit:
www.support.bemergroup.com
For general BEMER product support, contact:
product-support@bemer.services
The BEMER user hotline is available at:
usage-support@bemer.services
21