Default settings – application parameters/basic settings – B.BOX Classic
The parameters [PLUS] and [INTENSITY]
Default setting signal intensity (only
can be adjusted to become the default
with the B.PAD)
setting in the settings menu. To access this
While traveling, the B.PAD can be used as
menu, press and hold down the [SET] key.
a substitute for the B.BODY by reducing
You can select the parameters [PLUS] or
the intensity to [LOW].
[INTENSITY] by using the arrow keys. To
•
Select the menu item [INT] in the settings
exit the menu, select [EXIT] with the arrow
menu using the arrow keys and confirm
keys and confirm with the [SET] key.
with [SET].
•
Setting the plus Signal as default
Using the arrow keys, you can choose
•
between [HIGH] (high intensity) and
In the settings menu, select the menu item
[LOW] (low intensity).
[PLUS] with the arrow keys and confirm
•
with [SET].
Once the selection has been made,
•
confirm with [SET].
By using the arrow keys, the plus Signal can
be switched on/off.
•
Once the selection has been made,
confirm with [SET]. Now the plus Signal
has been switched on or off.
38
Setting the signal volume
•
Press and hold down the [SET] key to
activate the settings menu.
•
With the arrow keys, select [VOLUME]
and confirm with [SET].
•
Then choose the desired signal volume
by using the arrow keys.
The selection will always be acknowledged
with a signal at the chosen volume.
•
Confirm selection with [SET].
Setting the display brightness
•
•
Press and hold down the [SET] key to
Set the desired brightness by using
activate the settings menu.
the arrow keys.
•
Using the arrow keys, select [Display]
The display brightness corresponds
and confirm with [SET].
to the current selection.
•
Confirm selection with [SET].
Example – settings VOLUME
fr
es
en
To access the system information
•
Press and hold down the [SET] key
to activate the settings menu.
•
Select the menu item [INFO] by using
the arrow keys and confirm with [SET].
•
Now continue to your selection by
using the arrow keys.
39