Bemer Classic-Set Mode D'emploi page 18

Program selection
• •
Select the desired program by using the Activate/deactivate the plus Signal
keys [P1], [P2] or [P3].
by pressing the left arrow key.
• •
Designate the desired applicator module Start the application with the key
[A1/A2] by repeatedly pressing the key [SET].
[START/STOP].
Example – Program P2 (2 B.PAD applicator modules connected, port A1 selected)
34
Application using the memory card
•
The memory card is not standard equip- Slide the memory card into the card slot.
•
ment. Please refer to your local BEMER
Designate the desired applicator module
partner or BEMER support for more infor-
[A1/A2] by repeatedly pressing the key
mation.
[SET].
•
Activate/deactivate the plus Signal by
pressing the left arrow key.
•
Start the program with [START/STOP].
Example – Application using memory card (2 B.BODY applicator modules connected, port A1 selected)
fr es en
The card must be removed
again for short or program
applications.
35