Setting The Dip Switches - Epson TM-T70 Manuel De L'utilisateur

English

Setting the DIP Switches

CAUTION:
Be sure to turn off the printer before removing the cover of the DIP switches.
Removing it while the printer is turned on may cause problems such as an
electric short, which leads to a malfunction of the printer.
1. Make sure the printer is turned off.
2. Turn over the printer.
3. As shown in illustration L, remove the cover of the DIP switches on the
printer bottom by removing a screw.
4. Set the DIP switches using a fine-tipped tool.
5. Replace the cover of the DIP switches, and fix it by installing the screw.
The new setting becomes effective after the printer is turned on.
6 TM-T70 User's Manual