Epson TM-T70 Manuel De L'utilisateur page 5

Specifications
Printing method
Dot density
Printing direction
Printing width
Characters per line
(default)
Character spacing
(default)
Character structure
Character size
(Standard/Double-
height/Double-width/
Double-width and
Double-height)
Number of characters Alphanumeric characters: 95; International characters: 48
Print speed
Paper feed speed
Line spacing (default) 4.23 mm {1/6"}
Roll Paper (single-ply) Size: 79.5 mm ± 0.5 mm {3.13" ± 0.02"} Size: 57.5 mm ± 0.5 mm {2.26" ± 0.02"}
Thermal paper type
Interface(compatible) Serial (RS-232/RS-485)/Parallel (IEEE1284)/USB/EPSON UB series
Receive buffer
Cash drawer function 2 drives
*
Supplied voltage
80 mm paper width model
Thermal line printing
180 dpi × 180 dpi
Unidirectional with friction feed
72.2 mm {2.84"}, 512 dot positions
Font A: 42, Font B: 56
Font A: 0.28 mm {.01"} (2 dots)
Font B: 0.28 mm {.01"} (2 dots)
Font A: 12 × 24, Font B: 9 × 17
Font A is the default.
Font A: 1.69 × 3.38/1.69 × 6.77/
3.38 × 3.38/3.38 × 6.77 mm
Font B: 1.27 × 2.40/1.27 × 4.79/
2.54 × 2.40/2.54 × 4.79 mm
Extended graphics: 128 × 11 pages (including user-defined page)
High-speed mode:
170 mm/s {6.69"/s} max. (4.23 mm
{1/6"} feed)
Ladder bar code and 2D code
printing: 100 mm/s {3.9"/s}
Low-power consumption mode:
150 mm/s {5.91"/s} max. (4.23 mm
feed {1/6"})
Bit image, Ladder bar code, 2D
code and Page mode: 60mm/s
{2.4"/s}
The above speed values are approximate.
The values are when the printer prints with the default print density level at
24 V and 25°C {77°F}. However, the print speed for the low power
consumption mode (for 80mm paper width models) is the value when the
printer prints at 34°C {93.2°F}.
Speed is adjusted automatically depending on the voltage applied and
head temperature.
Approx. 170 mm/s {approx. 6.69"/s}
continuous paper feed
Maximum outside diameter: 83 mm {3.27"}
Roll Paper spool diameter: Inside: 12 mm {0.47"}; Outside: 18 mm {0.71"}
Specified: NTP080-80
4KB/45 bytes
DC+24 V ± 7%
58 mm paper width model
203 dpi × 203 dpi
52 mm {2.05"}, 416 dot positions
Font A: 34, Font B: 46
Font A: 0.25 mm {.01"} (2 dots)
Font B: 0.25 mm {.01"} (2 dots)
Font A: 1.50 × 3.00/1.50 × 6.00/
3.00 × 3.00/3.00 × 6.00 mm
Font B: 1.13 × 2.13/1.13 × 4.25/
2.25 × 2.13/2.25 × 4.25
200 mm/s {7.87"/s} max. (4.23 mm {1/
6"} feed)
Ladder bar code and 2D code
printing: 100 mm/s {3.9"/s}
Approx. 200 mm/s {approx. 6.69"/s}
continuous paper feed
3.75 mm {30/203"}
Specified: NTP058-80
English
v