Standards And Approvals - Epson TM-T70 Manuel De L'utilisateur

English
Current consumption
(at 24V)
Life
Temperature
Humidity
Overall dimensions
Weight (mass)
*: Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less
dpi: dots per 25.4 mm (dots per inch)

Standards and Approvals

The following standards are applied only to the printers that are so labeled. (EMC is tested using the
Epson power supplies.)
Europe: CE marking
North America: FCC/ICES-003 Class A
Oceania: AS/NZS CISPR22 Class A
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards
of this device.
You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation
could void your authority to operate the equipment.
CE Marking
The printer conforms to the following Directives and Norms:
Directive 2004/108/EC
FCC Compliance Statement For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
For Canadian Users
This Class A digital apparatus complies with Canadian ICES-003.
À l'intention des utilisateurs canadiens
Cet appareil numérique de classe A est conforme à la norme canadienne NMB-003.
vi
80 mm paper width model
High-speed mode:
Mean: Approx. 1.8 A
Low-power consumption mode:
Mean: Approx. 1.2 A
Mechanism: 15,000,000 lines
Thermal head: 100 million pulses, 100 km
Autocutter: 1,500,000 cuts
Operating: 5 to 45°C {41 to 113°F}
Storage: –10 to 50°C {14 to 122°F}, except for paper
Operating: 10 to 90% RH
Storage: 10 to 90% RH, except for paper
114 × 125 × 194 mm {4.49 × 4.92 × 7.64"} (H × W × D)
Approx. 1.8 kg {3.96 lb} (Roll paper exclosed)
WARNING
EN 55022 Class A
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
58 mm paper width model
Mean: Approx. 1.4 A
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11