Christopeit Sport AB 1 Notice De Montage Et D'utilisation page 17

Step 6:
Installation of the right pedal (74R) and the left pedal (74L) on the pedal
arms (54).
1. The pedals are marked „R" for right and „L" for left.
2. Screw the right pedal (74R) into the threaded hole on the right hand side
of the pedal arm (54) and tighten firmly.
(Note: Right and left are specified as viewed seated on the machine
during training. It must also be observed that the threaded part of the
right pedal must be screwed clockwise into the threaded hole of the
pedal crank.)
3. Screw the left pedal (74L) into the threaded hole on the left hand side
of the pedal arm (54) and tighten firmly.
(Note: The threaded part of the left pedal must be screwed anticlockwise
into the threaded hole of the pedal crank.)
4. Then attach the pedal straps left and right to the respective pedals.
Step 7:
Checks
1. Check the correct installation and function of all screwed and plug
connections.
Installation is thereby complete.
2.
When everything is in order, familiarise yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
17