Philips AVENT SCD843/01 Mode D'emploi page 16

16
English
AUDIO
AUDIO VOX
1
AUDIO 20°C
VOX
1
VOX VOX VOX VOX 20°C
AUDIO mode
1 Press the mode button on the side of the parent unit to switch to AUDIO
mode.
When the AUDIO mode is activated, the display of the parent unit switches
off. After 3 seconds the display will completely turn off and the status bar
will disappear.
Note: The status bar is not visible when the display is off.
Note: The link light shows that the parent unit is still on and connected to
the baby unit.
Note: When sensitivity level is not set to 'very high', low sounds will be
muted.
Note: Set the sensitivity level to 'very high' to have continuous sound on the
parent unit. Please see the Sensitivity level chapter for more information.
All sounds are constantly transmitted to the parent unit. If your baby cries,
the display of the parent unit is still off, but the sound level lights light up
green and the sounds detected by the baby unit are transmitted to the
parent unit. As long as no sound is detected, the sound level lights are off.
VOX mode
1 Press the mode button on the side of the parent unit to switch to VOX
mode.
Note: When the display is on, the selected mode is shown in the status bar.
The status bar is not visible when the display is off.
When the VOX mode is activated, the display and sound of the parent unit
switch off, if there is no sound detected for 20 seconds.