Replacing The Shaving Heads - Philips 6000 Série Mode D'emploi

Replacement

Replacing the shaving heads

2yrs
7 sec.
2 Rinse the cutting element with hot water.
3 Switch on the appliance and rinse the cutting
element once more to remove any remaining
hairs. Then switch off the appliance again.
4 Carefully shake off excess water and let the
nose trimmer attachment dry.
Tip: For optimal trimmer performance, lubricate
the trimmer teeth with a drop of sewing machine
oil every six months.
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
Replace damaged shaving heads immediately.
Always replace the shaving heads with original
Philips shaving heads ( 'Ordering accessories').
Replacement reminder
The replacement reminder indicates that the
shaving heads need to be replaced.The shaving
unit symbol lights up when you switch off the
shaver.
1 To replace the shaving heads, remove the
shaving heads from the shaving head holder
one by one. See 'Thorough Cleaning' for the
instructions on how to remove the retaining
rings and shaving heads.
2 To reset the replacement reminder, press and
hold the on/off button for approx. 7 seconds. If
you do not reset the replacement reminder, the
shaver resets automatically after 9 shaves.
31
English