Replacement; Replacing The Shaving Heads - Philips S3000 Série Mode D'emploi

1
2

Replacement

Replacing the shaving heads

2
1
8 Put the retaining frame back into the shaving
unit (1) and turn the lock clockwise (2).
9 Insert the hinge of the shaving unit into the slot
in the top of the shaver. Then close the shaving
unit.
Note: If the shaving unit does not close
smoothly, check if you have inserted the
shaving heads properly and if the retaining
frame is locked.
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
Replace damaged shaving heads immediately.
Always replace the shaving heads with original
Philips shaving heads (see 'Ordering accessories').
1 Switch off the appliance and make sure it is
disconnected from the wall socket.
2 Press the shaving unit release button to open
the shaving unit. Pull the shaving unit off the
appliance.
3 Turn the lock anticlockwise (1) and remove the
retaining frame (2). Place it aside in a safe place.
19
English