Philips S3000 Série Mode D'emploi page 16

16
English
Cleaning the pop-up trimmer
Caution: While rinsing the shaving heads, water
may drip out of the base of the appliance. This is
a normal occurrence. Internal electric parts are in
a waterproof compartment so the appliance will
be protected against water damage.
1 Switch off the appliance and make sure it is
disconnected from the wall socket.
2 Press the release button to open the shaving
unit.
3 Rinse the shaving unit and hair chamber with
lukewarm water.
4 Rinse the outside of the shaving unit with
lukewarm water.
Never dry the shaving unit with a towel or
tissue, as this may damage the shaving heads.
5 Carefully shake off excess water and let air dry
completely.
6 Close the shaving unit.
Clean the pop-up trimmer after each use.
Never dry the trimmer teeth with a towel or
tissue, as this may damage the trimmer teeth.
1 Switch off the appliance and make sure it is
disconnected from the wall socket.