Using The Heki2 - Dometic HEKI 2 Instructions De Montage Et De Service

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
Heki2
8

Using the Heki2

Opening in the tilting position (fig. b)
8.1
➤ Press the latches on both rotary bolts and turn them 90° (A).
➤ Hold the bracket in the middle and move it out of the original position (B).
➤ Tilt it downwards.
➤ Push the glass dome upwards (C).
Opening the glass dome is supported by the two gas springs after approx.
150 mm.
➤ Swivel the bracket to the glass dome and press it back into the original
position (D).
To close it, follow the instructions in the reverse order.
Opening in the half-way position (fig. c)
8.2
➤ Press the latches on both rotary bolts and turn them 90° (A).
➤ Hold the bracket in the middle and move it out of the original position (B).
➤ Tilt it downwards.
➤ Push the glass dome upwards (C).
Opening the glass dome is supported by the two gas springs after approx.
150 mm.
➤ Open both the latches (D).
➤ Tilt the bracket to the half-way position.
➤ Pull the glass dome down until the bracket is lying in the holders.
➤ Secure the bracket with both latches.
To close it, follow the instructions in the reverse order.
EN
Using the Heki2
9

Publicité

Table des Matières
loading

Table des Matières