Remington HC7170 Mode D'emploi page 5

During cordedless use:
The display will show the remaining run time in minutes.
When the run time reaches 5 minutes it will flash.
When in turbo mode, the display will be the same as above
with the turbo symbols (>>>)
• To preserve the life of your batteries, let them run out every 6 months then recharge for
4 hours.
• The clipper comes with a quick charge function, 10 minutes charging will give an
emergency burst of run time.
CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
USB
• Connect Micro USB to the appliance, and the USB connector to any standard USB port or
charger
• Product will only charge through USB and will not run in corded mode.
CORDED USE
• Connect the charging adaptor to the product then to the mains.
CAUTION Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
• When the product is switched on and fully charged it can be used in cordless mode for
up to 90 minutes.
INSTRUCTIONS FOR USE
BEFORE STARTING THE CUT
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level.
• Before cutting, always comb the hair so it is tangle free and dry.
TO ATTACH A COMB
• Hold the comb with its teeth upward.
• To attach a comb, align the legs of the comb with the holes in the top of the clipper on
each side of the blade and slide the legs into the trimmer until they click.
• To remove, firmly pull the comb straight up away from the clipper.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
5