Features Settings - General - Philips 32PW9551 Mode D'emploi

Features settings - General

The TV includes some special features to enhance your viewing pleasure. They are:
Timer: Sets sleeptimer, change channels or switch on the TV, at a preset time.
Child Lock: Locks all the control buttons on the TV. Can operate TV with the remote control only.
Parental Cont(rol): Locks selected channels.
Rotation: Adjusts picture tilting (only available in widescreen TVs).
DNR(Dynamic Noise Reduction): Reduces picture interferences or "noise" in poor reception conditions.
Dyn(Dynamic) Contrast: Enhances the contrast of details in lighter, average and darker areas.
Active Control: Optimises picture quality by measuring and analyzing the incoming signal to automati-
cally adjust picture quality settings. The "Light Sensor" setting uses a sensor to adjust the picture bright-
ness depending on the room light conditions.
Demo: Demonstrates the benefits of Pixel plus and Active Control.
1
Press key to start. A main menu
appears.
2
Press cursor down key to select
Features. Press cursor right key to
enter features settings.
3
Press cursor up or down key to
select settings.
4
Press cursor right key to start
selection or adjustment.
For Timer, Parental Cont. and
Demo, go to page 16 to 18 for details.
For Child Lock, Rotation, DNR,
Dyn. Contrast and Active Control,
press up or down cursor key to select
settings. To return to the previous
screen display, go to step 6. Repeat
steps 3 to 4 to adjust more settings.
To end go to step 7.
5
Press cursor right key to confirm.
6
Press cursor left key to end selection
or adjustment.
7
Press the key repeatedly to
remove the menu from the screen.
Your TV is ready for viewing.
Child Lock: Select "On" to lock all the control buttons
and "Off" to unlock.
Rotation: Press cursor up to tilt the picture to the right
or press cursor down to tilt the picture to the left.
DNR: Select Min, Med (optimum position), Max or Off.
Dyn.Contrast: Select Min, Med (optimum position), Max
or Off.
Active Control: Select "On" to optimise picture quality
or "Light Sensor" to optimise with sensor capability.
15