Samsung RF28HM Serie Manuel D'utilisation page 10

<RF25HM**>
2" (50 mm) 2" (50 mm)
125° 125°
(1430 mm) (1430 mm)
32 3/4" (830 mm) 32 3/4" (830 mm)
4 2/8" (106 mm) 4 2/8" (106 mm)
1 6/8" (45 mm) 1 6/8" (45 mm)
Each measurement based on the design
dimension, so it may differ depending on
the measuring method.
CAUTION
When moving your refrigerator
To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above the
fl oor).
Refer to 'Adjusting the doors' on page 14.
Flat-blade screw Flat-blade screw
driver(-) driver(-)
DA68-02952A-02.indb 10 DA68-02952A-02.indb 10
125° 125°
56 1/4" " 56 1/4
11 6/8" 11 6/8"
(300 mm) (300 mm)
Control Lever Control Lever
English - 10
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor. This surface
should be strong enough to support a fully loaded
refrigerator. To protect the fi nish of the fl ooring, cut
a large section of the cardboard carton and place
it under the refrigerator where you are working.
When moving a refrigerator, you need to pull and
push it straight forwards or back. Do not wiggle it
from side to side.
ACCESSORIES AND
REQUIRED TOOLS
The following accessories are included with your
refrigerator:
Hex wrench
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips Flat-blade
screwdriver(+) screwdriver(-)
Allen wrench
Pliers
(3/16") (5 mm)
Fastener
Socket wrench
(13/32") (10 mm)
2014. 5. 13. 2014. 5. 13. 5:08 5:08