Connecting The Antenna - Kenwood KTC-500DAB Mode D'emploi

Connecting the antenna

10
1. Place the antenna cable so that it follows a path to your vehicle's power socket.
2. If possible, tuck the cable behind the trim down the side of your windscreen.
Alternatively, secure the cable to your windscreen and dashboard with self-adhesive
clips.
3. Gently pull the auxiliary cable from the USB power cable to separate them.
4. Insert the USB power cable into the supplied 12V power adapter, then insert the
power adapter into your vehicle's power socket.
5. If you're connecting your KTC-500DAB with an auxiliary cable, insert the cable into
your vehicle's auxiliary socket. If you're connecting your KTC-500DAB by FM radio,
you can store the auxiliary cable so it's out of the way.
We recommend you connect your KTC-500DAB with an auxiliary cable to get the
best audio quality.