Kenwood KTC-500DAB Mode D'emploi page 3

Masquer les pouces Voir aussi pour KTC-500DAB:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
Safety
Before you use your KTC-500DAB, read the following safety instructions.
1.
Follow the operating instructions provided and take note of any warnings.
2.
If you do not follow the operating instructions provided, it may compromise the safety of your product and this may invalidate the warranty.
3.
Only use the supplied 12V power adapter with your product.
4.
Do not install your product in a way that may interfere with the safe operation of the vehicle, or affect the deployment of air bags or other safety items. Do not install cables and wires near
the steering wheel.
5.
Do not place your product on or near sources of your vehicle's heat or ventilation.
6.
Do not use your product in a way that may cause careless driving or improper control of your vehicle.
7.
Keep your product dry and only clean with a dry cloth.
8.
Do not expose your product to naked flames.
9.
Use batteries of the type listed in this user manual, and fit batteries correctly. Dispose of batteries in an environmentally friendly manner. Do not expose batteries to excessive heat or naked
flames.
10.
Keep batteries away from children. If the battery compartment does not close securely, do not use the product and keep it away from children. If you think someone has swallowed a battery
or placed a battery inside their body, seek medical attention immediately.
11.
Do not use your product in extremely hot or cold temperature.
12.
If you need to connect your product to the rear of your vehicle's head unit, remove any power before you start to install your product. When you have safely installed your product, you can
reconnect the power. See your vehicle's owner's manual for more information.
13.
Do not use the product if it is damaged.
14.
Product repairs should only be carried out by authorised personnel.
15.
Remove the 12V power adapter from the vehicle's power socket when you replace the battery of the vehicle.
Symbols on the product and in the user manual
Potentially serious risk to your personal safety. To avoid possible injury or death, obey all safety notices with this symbol.
Caution. Read the user manual before use.
12V DC power supply.
12V DC
1A
USB socket rated at 1 amp maximum.
Where to switch on or off the product, or put it in standby.
1

Publicité

Table des Matières
loading

Table des Matières