Braun PrecisionSensor Pro Mode D'emploi page 7

• If a patient takes antihypertensive, ask when it was
last taken.
• Wait approximately 3 minutes before repeating
a measurement.
Measuring
For accurate results, all blood pressure
measurements should be at the appropriate heart
level.
1. Fasten the monitor on the patient's left arm
on the radial side of the forearm (see illustration).
Make sure the cuff (G) fits snug. Stand close to
the patient in a position so that you can easily
see the display and the control buttons. Press the
«I/0» button (C). An arrow appears on the right
hand side of the display (A). If there are readings
stored in the memory, «mem» appears in the lower
left corner of the display.
2. Help the patient to take the measuring position
as shown. The arms should remain close to the
body. Make sure the monitor is positioned
approximately at the person's heart level.
Move the forearm of the patient up or down
(see illustration) in the direction of the arrow.
7