Treatment Of Surfaces - Webasto Cool Top Vario 10 E Notice De Montage

Cool Top Vario 10 E
1. Call setting F4.
2. To change the value, press the Fan + or Fan –
button on the control panel.
3. Confirm the desired value by pressing the Timer
button on the control panel.
3.6

Treatment of surfaces

The outside of the parking cooler consists of a PMMA
surface. This can be painted with water-soluble paints
(acrylic paints). For more detailed information on painting,
we recommend contacting the paint manufacturer. The
manufacturer of the parking cooler is not liable for damage
caused by incorrectly executed painting. The surface should
be painted with light colours if possible for optimum
efficiency of the parking cooler.
The surfaces of the parking cooler can be cleaned with
water (maximum of 70 °C) and a common household
washing-up liquid.
Household cleaners can be used for heavier soiling. Observe
the information of the cleaning agent manufacturer.
However, do not use cleaning agents which contain
chemical solvents or abrasive ingredients.
During cleaning, make sure that no liquid gets into the
inside of the parking air conditioner.
3 Installation
17