Clock Adjustment - Teac SR-L50 Mode D'emploi

1
In the CD mode or the TUNER mode, press the
DISPLAY button to select clock display.
":" blinks in the clock display.
< If the AUX is selected or the unit is off, press and
hold the MEMORY/CLOCK ADJ button for 2 or more
seconds, and continue the procedure from step
< Press the STOP button to cancel the time setting. (In
the TUNER mode, press the DISPLAY button.)
2 Within 4 seconds, press and hold the
MEMORY/CLOCK ADJ button for 2 or more seconds.
3 Press the .m or ,/ button to select
"12H" or "24H".
If you select "12H", "AM" indicator appears in the
morning and "PM" indicator appears after noon.
< In the TUNER mode, use the TUNING button.
4 Press the MEMORY/CLOCK ADJ button.
20

Clock Adjustment

MEMORY/CLOCK ADJ
DISPLAY
.
3
.m ,/
5
Press the .mor,/ button to set the
current hour.
< In the TUNER mode, use the TUNING button.
6
Press the MEMORY/CLOCK ADJ button.
7 Press the .mor,/ button to set the
current minute.
< In the TUNER mode, use the TUNING button.
8 Press the MEMORY/CLOCK ADJ button to finish the
time setting mode.
The clock starts from 00 second.
< If the unit is disconnected from the power supply for
more than 3 minutes, the clock and timer setting will
be reset.
< If the unit is disconnected for less than 3 minutes
the time displayed may not be correct.