Robert Juliat TIBO 535 Manuel page 11

Wireless DMX option (not available for the Variable White version)
• Protocol: Wireless Solution W-DMX™
• Refer to the OEM User's manual for general recommendations and
use of the transmitter:
• The antenna must be clearly visible from the transmitter.
• Refer to RJ-LED Software manual for activation procedure (page EN-15).
• Do not connect a DMX IN data cable in case of wireless DMX use.
• In case of protocol errors, the wireless DMX is automatically
deactivated. To activate the wireless DMX again, disconnect the
DMX IN data cable, and then switch the unit off and on.
DMX mode:
The first unit receives the DMX signal via the wireless network, then all the other units are connected to
the first one via DMX data cable.
http://www.wirelessdmx.com
EN - 9 -
Maximum:
32 units
EN