Intended Use; Assembly And Operation - Worx WX22AG Mode D'emploi

SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice
Before any work on the machine
itself, pull the mains plug from the
socket outlet.
Wear protective gloves
Angle Grinder
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.

INTENDED USE:

The machine is intended for cutting, roughing
and brushing metal and stone materials
without using water. For cutting metal, a
special protection guard for cutting (accessory)
must be used.

ASSEMBLY AND OPERATION

Action
Assembly
Assembling Auxiliary
Handle
Wheel Guard for Grinding
The coded projection
on the Wheel Guard (14)
ensures that only a guard
that fits the machine type
can be mounted.
Wheel Guard for Cutting
WARNING! For
cutting metal, always
work with the wheel guard
for cutting.
Adjusting Guard
Adjusting Outer Flange
Clamping
Rotating The Gear Case
Fitting the Disc
OPERATON
Holding the Hand Grip
Figure
See Fig. A1
See Fig. A2
11
See Fig. B
See Fig. C1 C2
See Fig. D
See Fig. E
See Fig. F
EN