Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Shield against or avoid solar radiation entering through windows.
●
Shut down unneeded heat sources such as lamps, printers,
●
copiers etc.
Before starting to use the device it must be allowed to stand
●
upright for some time, so that cooling liquid and oil can flow
to the compressor. The required time is 2 hours. Disregard-
ing this waiting period leads to irreparable damage to the
compressor (i.e. total loss/write off).
CAUTIONS
Keep the unit at least 1 meter away from TV or radios to
●
avoid electromagnetic interference.
Do not expose the unit under direct sun light to avoid sur-
●
face color fading.
Do not tilt the unit for more than 35°or upside-down while
●
transporting.
Place the unit on a flat surface with less than 5°inclination.
●
The unit operates more efficiently in certain room locations
●
(see Technical Specifications).
Empty the condensed drainage pan before putting the unit in
●
storage to prolong the unit lifetime at the end of the season.
Do not use chemical solvents (e.g. Benzene, alcohol-glazer) to
●
clean the unit surface to avoid scratching, damaging the surface.
Make sure to cut off the power before disassembling or
●
installing the air-inlet fence.
The battery must be removed from the appliance before it is
●
scrapped
The plug must be removed before cleaning, maintaining or
●
filling the appliance
IDENTIFICATION OF PARTS
1
Control panel
3
Signal receptor
5
Transport handle
7
Secondary drain port
9
Primary drain port
70 | 71
2
Cold air outlet
4
Remote controller
6
Evaporator air intake
8
Air outlet hose
GB
Publicité
Table des Matières
