Ribimex Ribiland PRBVB196TH Manuel D'instructions Et D'utilisation page 30

The following hazards may arise in connection with the tool's construction and design:
- Ignoring or omitting to follow the safety precautions may result in injury or damage.
- Moving parts may cause injury to hands or feet whenever the user is careless, does not follow the safety
instructions or when he uses the machine for other purposes.
- Spilled hydraulic oil may pose a risk of slipping for the operator and fire.
It is therefore possible that non-apparent residual risks may persist although all protective measures have
been taken.
g.1. Residual mechanical risks
Risk Description
Cut Injury hazard due to moving
parts.
Any contact with the moving
parts can cause serious injuries.
Entanglement Large clothing, jewellery or long
hair may become entangled in
the moving parts
g.2. Residual risks due to noise
Risk Description
Ear injury Prolonged work with the tool
may affect your hearing ability.
g.3. Residual risks related to materials
Risk Description
Contact, Dust may form in the working
inhalation area.
Some materials may create
dangerous dust and/or
particles.
g.4. Ergonomy
Risk Description
Misuse of Operating the tool without
personal proper protective equipment
protective will lead to body injuries.
equipment
Light Poor lighting may cause
accidents
g.5. Other risks
Risk Description
Projection During operation, the tool will
hazards project flying objects or debris
h. Always use caution when handling fuel.
- Wipe up all spills and then move the fuel container at least 3m from the fueling point before starting the
engine.
- Eliminate all sources of sparks or flame (i.e. smoking, open flames, or tools that can cause sparks) in the
areas where fuel is mixed, poured, or stored.
- Do not smoke while handling fuel or while operating the machine.
3.3- Specific Safety instructions for shredders
Initial preparation before operation
- Wearing protective equipment (such as a helmet, a hearing protection, protective goggles, dust mask,
non-slip footwear, protective gloves) when operating the machine reduces the risk of injury.
Safety measure(s)
Remain cautious when
operating the machine.
Never touch the moving
parts.
Wear tight clothing
And secure long hair
with hair net.
Safety measure(s)
Always wear an earmuff or earplugs.
Safety measure(s)
Always wear a respiratory mask (dust filtering
mask).
When available, use the suction dust device.
Safety measure(s)
Always wear appropriate protective clothing and
equipment
Ensure to work with sufficient light
Safety measure(s)
Wear safety helmet, safety goggles or face shield.
Residual hazard
A damaged or worn
out part must be
immediately replaced.
Page 30 / 45